Adjusting Windows Printer Drivers; Pcl Driver - Oki ES1624n MFP User Manual

A W
DJUSTING INDOWS PRINTER DRIVERS
Once your new upgrade has been installed, you may need to update
the Windows printer driver so that the additional features are
available to your Windows applications.
Remember that if your printer is shared between users on different
computers, the driver must be adjusted on each user's machine.
The illustrations shown here are for Windows XP. Other Windows
versions may appear slightly different, but the principles are the
same.
PCL
DRIVER
If you have installed a memory upgrade it is not necessary to change
the PCL printer driver, and you can ignore this section.
If you have installed a duplex unit or hard disk, proceed as follows:
1. Open the Printers window (called
"Printers and Faxes" in
Windows XP) via the Start Menu or
from the Windows Control Panel.
2. Right-click the printer icon for this
printer, and choose Properties from
the pop-up menu.
3. On the Device Options tab, check
the box for the upgrade you have
just installed.
4. Click OK to close the properties
window, and then close the Printers window.
ES1624n MFP User's Guide
Installing upgrades • 97