Toner Cartridge Replacement - Oki ES1624n MFP User Manual

T
ONER CARTRIDGE REPLACEMENT
To avoid toner wastage and possible toner sensor
errors, do not change the toner cartridge(s) until
"TONER EMPTY" is displayed.
The toner used in this machine is a very fine dry powder. It is
contained in four cartridges: one each for cyan, magenta, yellow and
black.
Have a sheet of paper handy so that you have somewhere to place
the used cartridge while you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the new
one came in. Follow any regulations, recommendations, etc., which
may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not
enough, use a cool, damp cloth to remove any residue. Do not use
hot water, and never use solvents of any kind. They will make stains
permanent.
If you inhale any toner or get it in your eyes, drink a
little water or bathe your eyes liberally in cold water.
Seek medical attention immediately.
Switch off the machine and allow the fuser to cool for about
10 minutes before opening the cover.
CAUTION!
WARNING!
ES1624n MFP User's Guide
Replacing consumable items • 70