Oki ES1624n MFP User Manual page 28

Management
NOTES:
1. The Management selection is blocked by a password. Since
the machine is shipped without a specific password, it is
recommended that the administrator create a new password
to ensure security.
2. Security can be split into "Scan-to Restriction" and "PIN
Setting" (Copy restriction) independently. However, total
restriction to the scanner requires both to be used and the
first digit of each PIN to be identical.
Scan-to restriction: After this feature is enabled you will be
prompted for a 4 digit PIN. Although 4 digits must be entered,
only the first digit is actually validated.
PIN Setting (copy restriction): This feature requires a 4 to 6
digit PIN. Unlike the Scan-to restriction, all digits are valid.
ITEM
Password
Scan To
Restriction
Add "To" Address
On
Pin Setting
Power Save Time Select to enter power saving mode after the machine
Language
DESCRIPTION OR CHOICE
Enter new password if the administrator wishes to
change the password. (Up to 8 alphabetical or
numerical digits are allowed to be entered in this
field. When entering alphabetical digits, note that
they are case-sensitive.)
Choice: Off, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Note: The PIN ID input screen is indicated at the
time of "PIN Setting = Enable".
If "Yes" is selected, when finishing sending an e-
mail, there will be a dialogue box inquiring whether
the user wishes to add the new e-mail address to the
machine's address book.
Choice: On, Off
Choice: On, Off
Note: The PIN ID input screen is indicated at the
time of "PIN Setting=Enable".
Enter four to six characters for your pin ID. A PIN ID
under four characters will be denied.
has stopped using for a specific period.
Choice: Off, 5, 15, 30, 60, 240 minutes.
Choose the language you prefer to show in the LCD-
display.
Choice: Eng/Fra/Ita/Spa/Ger/Por/Dut/Dan/Swe/Nor/
Gre
ES1624n MFP User's Guide
Configuring your machine.... • 28