Ricoh SP C435DN User Manual page 76

3. Troubleshooting
Problem
Printed paper becomes
creased.
Printed paper becomes
creased.
Edges of sheets are creased.
Edges of sheets are creased.
Duplex printing is
malfunctioning.
The image on the back side of
duplex printing has mottled
blank patches or is smudged.
74
Cause
The paper is damp.
The paper is too thin.
The paper is damp.
You are using non-
recommended paper.
You have selected a paper tray
that is not set for duplex print.
Missing patches and smudges
are caused by moisture leaking
from the paper.
Solution
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".
Use recommended paper. For
details about recommended
paper, see page 28 "Paper
Size Specifications" and
page 30 "Paper Type
Specifications".
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".
Use recommended paper. For
details about recommended
paper, see page 28 "Paper
Size Specifications" and
page 30 "Paper Type
Specifications".
Change the setting to enable
duplex printing for the paper
tray.
• Do not install the printer in
areas that are susceptible
to low temperature.
• Use paper that has been
stored in the recommended
temperature and humidity
conditions. For details
about the proper way to
store paper, see page 32
"Paper Precautions".