Alert Messages (Printed On Error Logs And Reports) - Ricoh SP C435DN User Manual

Alert Messages (Printed on Error Logs and Reports)

This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Message
"86: Error"
"91: Error"
"92: Error"
"Address book is in use."
"Auto-user prog. failed."
"Cannot print."
"Classification Code Error"
"Collate cancelled."
Cause
Parameters of the control code
are invalid.
Printing was canceled by the
auto job cancel function due to
a command error.
Printing was canceled because
the [Job Reset] key or the
[Suspend/Resume] key was
pressed on the printer's control
panel.
The printer currently cannot
perform authentication because
the Address Book is being used
by another function.
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
You have no privileges to print
the PDF file you want to print.
The classification code is not
specified with the printer driver.
Collate was canceled.
When Messages Are Displayed
Solution
Check the print settings.
Check that the data is valid.
Perform the print operation
again as necessary.
Wait a while, and then retry the
operation.
For details about the automatic
registration of user information,
see Security Guide.
Contact the owner of the
document.
Select [Optional] for the
classification code. For details
about how to specify
classification code settings, see
"Registering Classification
Codes", Operating Instructions.
Reduce the number of pages to
be printed.
57