Ricoh SP C435DN User Manual page 38

2. Loading Paper
2. Squeeze the clip on the side paper guide and end guide, and then adjust the guides to the
paper size being loaded.
3. Load the new paper stack print side up.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
4. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
36
DJF215
DJF216
DJF217