Loading Paper Into The Bypass Tray - Ricoh SP C435DN User Manual

2. Loading Paper

Loading Paper into the Bypass Tray

• For details about trays that can be loaded for each paper size and type, see page 28 "Paper Size
Specifications" and page 30 "Paper Type Specifications".
• Do not mix different types of paper.
• After loading paper, specify the paper size and type using the control panel. When printing a
document, specify the same paper size and type in the printer driver as specified on the printer.
• When loading label paper, load it one by one.
• Paper feeding conditions and printing quality may vary depending on the paper thickness and
width. Be sure to perform test printing using the same paper beforehand.
• Load paper with the print side down and in the short-edge feed direction.
1. Press the mark in the center of the bypass tray.
Open the bypass tray.
38
DJF222
DJF223