Ricoh SP C435DN User Manual page 62

3. Troubleshooting
Message
"Insufficient Memory."
"Memory Retrieval Error."
"No response from server."
"Paper Size Error"
"Paper Type Error"
60
Cause
A memory allocation error
occurred.
A memory allocation error
occurred.
A timeout occurred while the
printer was connecting to the
server for LDAP Authentication
or Windows Authentication.
Printing was canceled because
the specified paper size cannot
be fed from the tray.
The printer does not recognize
the paper type specified using
the printer driver.
Solution
PCL 6:
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help. On the printer driver's
[Detailed Settings] tab, click
[Print Quality] in "Menu:", and
then select [Raster] in the
"Vector/Raster:" list. In some
cases, it will take a long time to
complete a print job.
PCL 5c, PostScript 3:
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
Turn off the printer, and then
turn it on again. If the message
appears again, contact your
service representative.
Check the status of the server.
Check the available paper size.
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, check the user
paper type settings of the
printer.