Connecting The Power Adapter And The Power Cord - Toshiba B-FV4D SERIES Owner's Manual

2. PRINTER SETUP
2.5 Connecting the
Power Adapter and
the Power Cord
NOTES:
1. If a power cord is not provided
with this printer, please
purchase the correct one
referring to page 1-2.
2. The EA1050B-240 AC adapter
should be exclusively used for
the B-FV4D-xxxx-QM-R
Series printer. The B-FV4D-
xxxx-QM-R Series printer
must be powered by the
EA1050B-240 AC adapter.
3. The EA10681P-240 AC
adapter should be exclusively
used for the B-FV4D-xxxx-
QQ-R Series printer. The B-
FV4D-xxxx-QQ-R Series
printer must be powered by
the EA10681P-240 AC
adapter.
1. Make sure that the printer power switch is in the OFF (O) position.
2. Insert the Power Cord into the inlet of the Power Adapter.
Power Cord
3. Insert the Power Adapter connector into the Power Jack on the rear of
the printer.
The areas indicated by the ellipse have sharp edges.
To avoid injury, be careful not to touch them when handling the
printer.
E2-5
ENGLISH VERSION EO1-33097

2.5 Connecting the Power Adapter and the Power Cord

Power Adapter Connector
WARNING!
Power Adapter
Power Jack