Toshiba B-FV4D SERIES Owner's Manual page 21

2. PRINTER SETUP
2.7 Loading the Media
(Cont.)
NOTE: Media path
For the outside- wound media
Feed Gap Sensor
Platen
Black mark sensor
For the inside- wound media
Feed Gap Sensor
Platen
Black mark sensor
NOTES:
1. Make sure that the print side
faces up.
2. Cut the leading edge of the
media straight with scissors.
1. Open the Top Cover while pulling the Lock Release Portions as
indicated by the arrows.
Top Cover
2. Open the Media Roll Holders by pressing the Holder Lock Lever and
slide them outward. Place the media roll between the holders ensuring
that print side is facing up, then using Holder Lock Lever slide the
Media Roll Holders to clamp the media roll tightly.
E2-8
ENGLISH VERSION EO1-33097
2.7 Loading the Media
Lock Release Portion
Holder Lock Lever