Toshiba B-FV4D SERIES Owner's Manual page 24

2. PRINTER SETUP
2.7 Loading the Media
(Cont.)
CAUTION!
To separate the printed
media from the printer in
batch mode, be sure to tear
the media off at the Media
Outlet or cut the media past
the Strip Plate. If you tear
the media off at the Print
Head by mistake, be sure to
feed one label (10 mm or
more) with the FEED Button
prior to the next issue.
Failure to do this may cause
a paper jam.
5. Close the Top Cover, then press the [FEED] button to check the media
feeds correctly.
FEED Button
There are three issue modes available for this printer.
Batch mode:
In the batch mode, the media is continuously printed and fed until the
number of prints specified in the issue command has been printed.
E2-11
ENGLISH VERSION EO1-33097
2.7 Loading the Media