Table of Contents
Advertisement
4.1.1 Major Components
4.1.1.1 PMU
The Tegra 200 Series Developer Board includes a multi-channel power management unit for embedded processors (TI
TPS658621).
Feature List
Host Interface
-
I2C Control I/F
-
Core/CPU power request signals
-
32.768KHz Clock
-
Reset input
-
Reset output
RTC LDO
-
1.0V-1.2V nominal voltage range with 25mV steps
-
Separate LDO for RTC domain allowing Deep Sleep mode support – the Tegra 250 lowest power mode
-
Switch RTC domain automatically back to 1.2V when wake-up event detected (w/CORE_PWR_REQ)
CORE switcher
-
1.0V-1.2V nominal voltage range with 25mV steps
-
CORE and RTC domains must track each other within 170mV
-
Tracking can be ensured in software
-
Optimized DVS handled by NVIDIA BSP (DVFS architecture)
-
Turned off if CORE_PWR_REQ is de-asserted – on at 1.2V when CORE_PWR_REQ asserted
CPU switcher
-
0.85-1.0V nominal voltage range with 25mV steps
-
Optimized DVS handled by NVIDIA BSP (DVFS architecture)
-
Turned off if CPU_PWR_REQ is de-asserted – on at 1.0V when CPU_PWR_REQ asserted
PLL LDO
-
Use 1.1V LDO
-
Very good line regulation ensured using DC/DC switcher as LDO source
STDBY input
-
Standby mode: Only the minimum rails are kept powered (RTC and SYSTEM domains, DDR2 in self-refresh)
-
The Tegra 250 indicates Standby mode by de-asserting CORE_PWR_REQ (polarity programmable)
4.1.1.2 Battery Charge Controller
The Tegra 200 Series Developer Board includes a battery charger with input current detect comparator and charge enable pin
(TI bq24745). For a detailed description and list of device features, see http://focus.ti.com/lit/ds/symlink/bq24745.pdf.
4.1.1.3 Battery Pack (Not Included)
The Tegra 200 Series Developer Board can be used with a 3 cell (3S1P) Lithium ion battery pack that has a nominal voltage of
10.8 volts and a total capacity of 2200mAh. The 3S1P is ideal for applications that can operate on lower voltages.
4.1.1.4 External Switchers, LDOs, Power Switches
The Tegra 200 Series Developer Board includes the following components:
Notebook System Power Controller (TI TPS51220): a dual synchronous buck regulator controller with 2 LDOs. For a
detailed description and list of device features, see http://focus.ti.com/lit/ds/symlink/tps51220.pdf.
DDR2 Memory Power Supply (TI TPS51116): provides a power supply for the DDR2memory system. For a detailed
description and list of device features, see http://focus.ti.com/lit/ds/symlink/tps51116.pdf.
350mA Low-Dropout Linear Regulator (TI TPS72012): for a detailed description and list of device features, see
http://focus.ti.com/lit/ds/symlink/tps72012.pdf.
Step Down Converter (TI TPS62290): synchronous step down dc-dc converter optimized for battery powered portable
devices. For a detailed description and list of device features, see http://focus.ti.com/lit/ds/symlink/tps62290.pdf.
135-mΩ Dual Power-Distribution Switch (TI TPS2052): for a detailed description and list of device features, see
http://focus.ti.com/lit/ds/symlink/tps2052.pdf.
135-mΩ Power Distribution Switch (TI TPS2051): for a detailed description and list of device features, see
http://focus.ti.com/lit/ds/symlink/tps2051.pdf.
DG-04927-001_v01
Advance Information – Subject to Change
NVIDIA CONFIDENTIAL
Tegra 200 Series Developer Board User Guide
16
Advertisement
Table of Contents
