Carf-Models Ultra Lightning Instruction Manual page 32

tures common in successful aerobatic planes and features common in high-tech jets. This is
what makes it so unique... and that's why it takes a little while to get our point, but after just
one single flight you will understand !
We are absolutely confident that you already appreciate the level of prefabrication and com-
pleteness you've received for the money you paid. Now comes the flying, and this will top it
off...
We have tried to make this airplane as complete as possible, and with good feedback from cus-
tomers you will help us to continue making good things even better. We appreciate your com-
ments very much.
Email: info@carf-models.com
Thank you!
Your Composite-ARF Team
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Appendix:
Lightning Kit Contents:
Description
Fuselage (with nosegear door taped to fuselage)
Main hatch with ventral fin glued on
Right wing (with LG doors and servo cover taped on)
Left wing (with LG doors and servo covers taped on)
Wing tube 40mm Ø anodised x 990mm long
Fuel tank kevlar (left)
Fuel tank kevlar (right)
Canopy frame (with fixings completed)
Clear canopy
Nose cone (fibreglass)
Exhaust nozzle (fibreglass)
Stabiliser assembly (with servo cover taped on)
Fin assembly (with carbon tube spar 14mm Ø x 200mm long)
Middle inlet duct joiner (Fibreglass white)
Bypass ducting (carbon) upper half
Bypass ducting (carbon) bottom half
Bypass rear cone (carbon)
Exhaust ducting (assembled)
Fuel tank hardware pack
Cockpit tub - 3 pieces (moulded plastic, white)
Hardware pack
Instruction Manual and photosheets (English)
31