Carf-Models Ultra Lightning Instruction Manual page 6

5. Retract and brake valves: CARF can supply the proven 'Jet-tronics' electronic brake and
retract valves as an option and these were used in all 3 prototype Ultra Lightnings.
6. Batteries, switches, extension leads.
7. Powerbus system for servos. CARF can supply the Powerbox range as an option.
Recommended Servos:
Ailerons
Flaps/speedbrakes
Elevators
Rudder
Nosegear steering
If you choose to use alternative servos of similar quality and torque, for example Futaba S9351,
you might have to adjust the cnc milled plywood servo mounts a little. With feedback from cus-
tomers and 'Reps' we hope to provide more servo recommendations in a future update.
Recommended 'SWB Double-Loc' Servo Arms:
Ailerons
Flaps
Elevators
Rudder
A set of seven SWB 1" arms (JR or Futaba) is available for
the Lightning as an option. Please see 'Related Products' on
the Lightning page on our website for full details.
Did you read the hints and warnings above and the instructions carefully?
Did you understand everything in this manual completely?
Then, and only then, let's start assembling your CARF-Models Ultra Lightning
2 x JR/Graupner 8511/8611
2 x JR/Graupner 8511/8611
2 x JR/Graupner 8511/8611
1 x JR/Graupner 8511/8611
1 x JR/Graupner 8411
2 x 1" half arm
2 x 1" half arm
2 x 1" half arm
1 x 1" half arm
If not, please read it again before you continue.
6