Carf-Models Ultra Lightning Instruction Manual page 35

Landing Gear pack (Option)
Quantity Description
3 Retract units (Behotec C50) 1 nose unit and 2 main units.
3 Steel connecting pins for retract/oleo legs (8mm Ø)
1 Wheel collar (8mm I.D) for nose connection pin
2 Main wheels 115mm Ø, with 2 brakes and 2 axles (Intairco)
1 Nose wheel 75mm Ø (Behotec)
2 Oleo legs - main (Behotec)
1 Nose leg with axle and trailing link (Behotec)
2 Steering arms for Nose leg (Behotec)
2 Outer door fixing collars (aluminium)
3 Air tubing 3mm O.D (3 colours) 2 metres each
1 Air tubing 4mm O.D. 1 metre
12 Quick-connectors for air tube (Robart) for wings and nosecone
3 Door cylinders (BVM 1" stroke cylinders)
12 Set screws for oleo legs etc.
2 4-way push-in connectors for 3mm O.D tube (Festo)
1 3-way push-in connector for 4mm O.D tube (Festo)
12 Tees for airline (Festo T-PK-2)
1 Air filler/one-way valve (Festo 4mm)
1 Air Tank and 4mm valve (Behotec)
Additional Fuel Tank (Option)
Quantity Description
1 Upper half tank (kevlar)
1 Lower half tank (kevlar)
1 Aluminium fuel tank cap set (includes M3 x 25mm bolt)
1 Aluminium sleeve (for cap hardware)
1 Kerosene Stopper for fuel tanks (Robart #400)
1 Felt clunk (Webra type)
2 Brass tubes 4mm Ø x 90mm long
4 Brass tube barbs (I.D. 4mm x 5mm long)
1 Fuel tubing 4mm I.D. x 600mm
Available Accessories and Options:
Touch-up paint set for your colour scheme
Jetcat P160 turbine set
Landing Gear and gear door/pneumatic support set
Extra Fuel tank kit - kevlar
SWB double-loc servo arms (pack of 7 pieces, JR or Futaba)
Electronic door, gear, brake and door-sequencing valves (Jetronic)
PowerSwitch for RX dual batteries
Powerbox Competition
34