Table of Contents
Advertisement
Available languages
Available languages
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
IMPORTANT:
Observe all governing codes and ordinances.
Installer: Leave Installation Instructions with homeowner.
Homeowner: Keep Installation Instructions for future reference
and for the local electrical inspector's use.
Keep cardboard shipping piece or plywood under refrigerator
until it is installed in the operating position.
Comply with installation specifications and dimensions.
Remove any moldings or decorative panels from kitchen
cabinets that prevent the refrigerator from being serviced.
Contact a qualified electrical installer.
TOOLS NEEDED:
Make sure that you have the tools necessary for proper
installation:
Hand drill or electric drill
(properly grounded)
¹⁄₄" nut driver and
drill bit
Flat-blade screwdriver
⁵⁄₁₆" or adjustable wrench
2
REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
⁷⁄₁₆" and ¹⁄₂" open-end
wrenches
Two adjustable wrenches
Socket wrench
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
PARTS NEEDED:
Your refrigerator dealer has a kit available with a ¹⁄₄" (6.35 mm)
saddle-type shutoff valve, a union, and copper tubing.
Or you can purchase a ¹⁄₄" (6.35 mm) copper tubing with
shutoff valve and a ¹⁄₄" (6.35 mm) compression fitting
(coupling).
Depending on water line connections, you may also need a ¹⁄₄"
(6.35 mm) nut and ¹⁄₄" (6.35 mm) ferrule.
Product Dimensions
Top View
⁵⁄₈
35
"
(90.5 cm)
⁵⁄₈
¹⁄₂
15
"
19
(39.6 cm)
(49.5 cm)
A. Dimensions may vary based on the model
³⁄₈
"
(95.3 mm)
24"
(61.0 cm)
¹⁄₂
27
"
(69.7 cm)
¹⁄₈
30
(76.4 cm) max.
"
⁵⁄₈
2
"
(6.7 cm) max.
"
A
Advertisement
Table of Contents
