[
]
C. Basic operation
1. Answer a call
When a call comes in, the device will answer automatically. If you cancel auto answer feature and set
auto answer time, you will hear the bell ring at the set time and the device will auto answer after a
timeout.
2. Call
Configure shortcut key as hot key and setup a number, then press shortcut key can call the
configured number.
3. End Call
Enable DSS key hang up to end call.
4. Call record
The device provides three call records, missed call, received call, dialed call. You can see call records of
the webpage.
D. Page settings
1. Browser configuration
When the device and your computer are successfully connected to the network, enter the IP address
of the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the login interface of the web page
management.
Enter the user name and password and click the [logon] button to enter the settings screen.
After configuring the equipment, remember to click SAVE under the Maintenance tab. If this is
not done, the equipment will lose the modifications when it has been rebooted.