Installing Optional Service Cards - Panasonic KX-TDA30 Installation Manual

2.2 Installation of the Hybrid IP-PBX
Type
DPH4
DPH2
ECHO8
EXT-CID
MSG2
SVM2
*1
Only one of either the DLC4 or SLC4 card can be installed.
*2 A maximum of two DLC8 cards, two SLC8 cards, or one of each card can be installed.
*3 Only one of either the DPH4 or DPH2 card can be installed.
CAUTION
To protect the main board from static electricity, do not touch parts on the main board or on the optional
service cards. To discharge static electricity, touch ground or wear an earthing strap.
Notes
• When installing or removing the optional service cards, the power switch of the Hybrid IP-PBX must
be in the off position.
• For each card, the maximum number that can be installed in the Hybrid IP-PBX is listed in "1.3.1
Optional Equipment".
• Any card that exceeds the capacity of the Hybrid IP-PBX will be ignored.
• When the Hybrid IP-PBX starts up with an invalid configuration, some cards will be ignored.

Installing Optional Service Cards

1.
Before installing the optional service cards, cut and remove the appropriate dummy cover plates from
the main unit.
46 Installation Manual
Card
Max
*3
1
1
1
2
2
Dummy Cover Plate
02 03 04 05
Slot Number
06 07 08 09 10 11