Panasonic KX-TDA30 Installation Manual page 31

AC Adaptor Capacity
The following load figures can be supported.
Supplied AC Adaptor only
Supplied AC Adaptor and Additional AC Adaptor
*1 If the load figure exceeds 96, it cannot be supported by the KX-TDA30. In this case, use the KX-TDA100 with M-Type Power Supply
Unit (PSU-M), or the KX-TDA200 with either PSU-M or L-Type Power Supply Unit (PSU-L).
Calculation Example
Other DPT/Other DSS console (except KX-
T7600 series, KX-T7560/KX-T7565)
CS
ISDN Telephone
Total
The total load figure is 33. As this exceeds 32, you need to connect an additional AC adaptor.
Connected AC Adaptor
Equipment Type
4 units
3 units
5 units
1.4 Specifications
Maximum Load Figure
32
96 *1
Load Figure
16
12
5
33
Installation Manual 31