Connection Of 2.4 Ghz Portable Stations; Overview - Panasonic KX-TDA30 Installation Manual

2.8

Connection of 2.4 GHz Portable Stations

2.8.1

Overview

The following equipment is required to connect the wireless system:
CS: Cell Station (KX-TDA0141)
This unit determines the area covered by the wireless system. Up to 2 calls can be made at the same time
through each CS.
PS: 2.4 GHz Portable Station (KX-TD7680/KX-TD7690)
The KX-TDA30 can support up to 28 PSs. For more details about the PS, refer to the PS Operating
Instructions.
CAUTION
• The CS should be kept free of dust, moisture, high temperature (more than 40
(less than 0
• The CS should not be placed outdoors (use indoors).
• The CS should not be placed near high-voltage equipment.
• The CS should not be placed on a metal object.
• Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the KX-
TDA wireless system. Examples of such systems are cordless telephones, wireless LAN, Home
RF, microwave ovens and other ISM devices. These systems may cause minor noise.
• Keeping some distance between the equipment listed below may prevent interference. (The
distance may vary depending on the environment.)
Equipment
CS and office equipment such as a computer, telex, fax
machine, etc.
CS and PS
Each PS
Hybrid IP-PBX and CS
CS and CS
Please take into consideration the distance between the CSs when site planning. Please consult
a certified dealer for details.
However, the required distance between CSs may vary depending on the environment of the
installation site and conditions in which the wireless system is used. Conduct the site survey to
determine the appropriate distance.
), and vibration, and should not be exposed to direct sunlight.
˚C
2.8 Connection of 2.4 GHz Portable Stations
˚C
Distance
More than 2 m
More than 1 m
More than 0.5 m
More than 2 m
More than 15 m
Installation Manual
), low temperature
143