Panasonic KX-TDA30 Installation Manual page 162

2.8 Connection of 2.4 GHz Portable Stations
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set to the Hybrid
IP-PBX. Before registering the PS to the Hybrid IP-PBX, enter the PIN set to the Hybrid IP-PBX into the PS.
By doing so, the PS will only be registered to the Hybrid IP-PBX with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS. Therefore, the
PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid IP-PBX.
Therefore, during normal operation after registration, even if there is more than 1 Hybrid IP-PBX
with the same PIN near the PS, the PS will not be inadvertently linked to a different Hybrid IP-PBX.
Setting the PIN for Hybrid IP-PBX
[692]
Setting the PIN for PS
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
Select
"CHANGE PIN"
162 Installation Manual
PIN for PS Registration
4 digits
ENTER
PIN for PS Registration
1 to 4 digits
SEL
PIN for PS Registration
1 to 4 digits
S1
ENTER
1234
1234
ENTR
S1
1234
END
C.Tone
C.Tone