Vehicle Settings Calling Up - Mercedes-Benz COMAND Operating Instructions Manual

Vehicle settings
44
Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual.
Important safety notes
G
WARNING
If you operate mobile communication equip-
ment while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate this equipment when the vehicle
is stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating mobile communications equipment in
the vehicle.
Vehicle settings
Calling up vehicle settings
Press the Ø button.
X
or
Press Vehicle
X
The vehicle menu is displayed.
To select Vehicle
X
the controller.
To select the desired vehicle setting: turn
X
and press the controller.
The main area with the setting element is
active.
Selecting a different vehicle setting:
To activate the menu for selecting the vehicle
X
setting: slide 5 the controller.
in the main function bar.
Settings: turn and press
Exiting the vehicle settings:
To select &: slide 6 and press the con-
X
troller.
Ambient lighting
General notes
You can set the following for the ambient light-
ing:
Interior welcome light
R
Ambient lighting is activated for a short time
when the driver's door is opened.
Brightness
R
This setting makes an additional change to
the brightness of the ambient lighting.
Color
R
This setting changes the color of the ambient
lighting.
Setting the brightness
Call up Vehicle Settings
X
To select Ambient Light
X
and press the controller.
The setting element is active.
Press the controller.
X
To change the brightness value: turn and
X
press the controller.
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Setting the color
Call up Vehicle Settings
X
To select Ambient Light
X
press the controller.
The setting element is active.
To select a color: turn the controller.
X
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Setting the interior welcome light
Call up Vehicle Settings
X
To select Interior Welcome
X
and press the controller.
Press the controller.
X
The function is switched on or off, depending
on the previous status.
( page 44).
Y
Brightness: turn
( page 44).
Y
Color: turn and
( page 44).
Y
Light: turn