Your Comand Equipment; Vehicle Settings - Mercedes-Benz COMAND Operating Instructions Manual

Vehicle settings

48

Your COMAND equipment

These operating instructions describe all
standard and optional equipment available
for your COMAND system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your COMAND system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your COMAND system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Vehicle settings
Calling up vehicle settings
Press the Ø button.
X
The vehicle menu is displayed.
To select Vehicle Settings Vehicle
X
press the controller.
The Vehicle Settings Vehicle Settings
To select the desired vehicle setting: turn
X
and press the controller.
The main area with the setting element is
active.
Selecting a different vehicle setting:
To activate the menu for selecting the vehi-
X
cle setting: slide 5 the controller.
Exiting the vehicle settings:
To select &: slide 6 and press the con-
X
troller.
Settings: turn and
menu is active.
Ambient lighting
General notes
You can set the following for the ambient
lighting:
Zone
R
The zone setting determines the area in
which the brightness setting is to be
applied. If the Complete zone is selected
for longer than 0.5 seconds, the brightness
of the Front zone is adopted for the entire
vehicle.
Brightness
R
This setting makes an additional change to
the brightness of the ambient lighting. The
brightness change is only effective for the
selected zone. For this reason, the zone for
which the brightness change is to be active
must be selected first.
Color
R
This setting changes the color of the ambi-
ent lighting.
Setting the brightness of the zones
Call up vehicle settings (
X
To select Ambient Light: Ambient Light: Brightness
X
turn and press the controller.
The left-hand setting element is active. The
brightness value for the currently selected
zone is displayed.
Press the controller.
X
page 48).
Y
Brightness: