Settings - Mercedes-Benz COMAND Operating Instructions Manual

Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

Rear view camera
48
Switching the display off manually
To select &: slide 6 and press the con-
X
troller.
Switching the display on automatically
You can automatically switch the 360 camera
X
display using reverse gear (
Switching the 360° camera auto-
matic mode on/off
This function activates the 360° camera when
reverse gear is engaged.
Press
Vehicle
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select
System
X
the controller.
To select
360°
X
controller.
The
360° Camera
Select
Activation by R
X
The function is switched on O or off ª.
Opening the camera cover for clean-
ing
To select
Open Camera Cover
X
camera menu: turn the controller and press to
confirm.
The
Please Wait...
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
the ignition is switched off
R
the vehicle exceeds a moderate speed
R
i
Depending on the vehicle's equipment, this
function is not available.
Rear view camera
General notes
The rear view camera covers the immediate sur-
roundings of the vehicle and assists you when
parking.
page 48).
Y
in the main function bar.
Settings: turn and press
Camera: turn and press the
menu appears.
gear.
in the 360°
message appears for
The rear view camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. When maneu-
vering or parking, make sure that there are no
persons, animals or objects in the area in which
you are maneuvering.
There may be fewer settings depending on your
vehicle's equipment.
You can find further information about the rear
view camera in the vehicle Operator's Manual.
Switching the rear view camera auto-
matic mode on/off
This function activates the rear view camera
when reverse gear is engaged.
Press the Ø button.
X
or
Press
Vehicle
in the main function bar.
X
The vehicle menu is displayed.
Slide 6 the controller.
X
To select
System
Settings: turn and press
X
the controller.
Select
Rear View
Camera.
X
The
Rear View Camera
Select
Activation by R
X
The function is switched on O or off ª,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the area behind the vehicle is
shown with guide lines in the display. For fur-
ther information on the rear view camera (see
the vehicle Operator's Manual).
Opening the camera cover for clean-
ing
To select
Open Camera Cover
X
view camera menu: turn and press the con-
troller.
The
Please Wait...
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
the ignition is switched off
R
the vehicle pulls away
R
menu appears.
gear.
in the rear
message appears for

Advertisement

Table of Contents
loading

Table of Contents