Traffic Announcements - Mercedes-Benz COMAND Operating Instructions Manual

Basic functions
26
Changing the audio source
Call up quick access (
X
The current audio source is displayed.
To display the available audio sources:
X
glide down with one finger.
To select an audio source: glide your finger
X
to the left or right and press.
The selected audio source is played.
Sending DTMF tones
The function is not supported by all mobile
phones (see the manufacturer's operating
instructions).
Call up quick access during a call (
X
To select characters: glide your finger to the
X
left or right and press.
Every character selected will be transmitted
immediately.
page 22).
Y
page 22).
Y
Basic functions
Switching the multimedia system on/
off
Press the q control knob.
X
When you switch the multimedia system on, a
warning message will appear. The multimedia
system calls up the previously selected menu.
If you switch the multimedia system off, play-
back of the current media source will also be
switched off.
Adjusting the volume
Adjusting the volume for media sources
Turn the q control knob.
X
or
Press the W or X button on the multi-
X
function steering wheel.
The volume of the media source currently
selected changes.
Adjusting the volume for traffic
announcements and navigation
announcements
During traffic or navigation announcements:
Turn the q control knob.
X
or
Press the W or X button on the multi-
X
function steering wheel.
i
You can set the volume for navigation
announcements to be different from the vol-
ume of the respective media source.
Adjusting the volume for phone calls
You can adjust the volume for hands-free mode
during a telephone call.
Turn the q control knob.
X
or
Press the W or X button on the multi-
X
function steering wheel.
i
Setting the volume for the Voice Control
System voice output; see the separate oper-
ating instructions.