Favorites Button - Mercedes-Benz COMAND Operating Instructions Manual

To select System Settings: slide 6, turn
X
and press the controller.
A menu appears.
To select Language: turn and press the con-
X
troller.
The list of languages appears. The # dot indi-
cates the current setting.
Select the desired language.
X
The multimedia system loads the selected
language and sets it.
Calling up the favorite functions
The favorites function can be called up as fol-
lows:
via the System Settings
R
via the Favorites button on the controller
R
( page 20)
Y
via the Favorites button on the touchpad
R
( page 21)
Y
Calling up the Favorites function via the sys-
tem menu:
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System Settings: slide 6 and
X
press the controller.
A menu appears.
To select Favorite
X
controller.
The favorites are displayed.
To select the desired function, e.g.
X
book: turn and press the controller.
A menu appears.
Calling up the Favorites function using the
controller:
Press the favorites button on the controller.
X
The favorites are displayed.
To select the desired function, e.g.
X
book: turn and press the controller.
Calling up the Favorites function via the
touchpad:
Press the favorites button on the touchpad.
X
The favorites are displayed.
To select the desired function, e.g.
X
book: turn and press the controller.
menu
Functions: press the
Phone‐
Phone‐
Phone‐
Importing/exporting data
The Favorites function can be exited at any time.
To exit the Favorites function:
Press the Favorites button again
X
or
Press % on the controller.
X
or
Press the % button on the touchpad.
X
or
To select % in the display: turn and press
X
the controller.
Further information on the Favorites function
( page 30).
Y
Importing/exporting data
General notes
!
Never remove the stick or card when writing
data to the USB stick or the memory card. You
may otherwise lose data.
Using this function, you can do the following
with your personal multimedia system data:
transfer your personal COMAND data from
R
one system/vehicle to another.
make a backup copy of your personal data
R
(export data) and load it again (import data).
protect your data from unwanted export by
R
activating a PIN prompt (presetting: deacti-
vated ª).
You can either use an SD memory card or a USB
storage device (e.g. a USB stick) as temporary
storage.
Please remember that the NFTS file system is
not supported. The FAT32 file system is recom-
mended.
41
Z