Restoring A Nuisance Channel; Call Alert Paging; Receiving A Call Alert Page; Sending A Call Alert Page - Motorola APX4000 XH User Manual

The radio continues scanning the remaining channels
in the list.

Restoring a Nuisance Channel

To restore the deleted nuisance channel, perform
one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to
the original channel.
• Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the
system administrator.

Call Alert Paging

This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if
they are unable to hear their radios, you can send
them an individual Call Alert page. You can also
verify if a radio is active on the system.
Depending on how your radio is programmed, when
you make an Enhanced Private Call, the radio either
automatically sends a call alert page if there is no
80
English
answer after the maximum ring time, or when you
press the PTT button.
Note
This feature must be preprogrammed by a
qualified radio technician.

Receiving a Call Alert Page

When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The
call received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See Making a Talkgroup Call
Private Call (Trunking Only)
information on returning the call.

Sending a Call Alert Page

The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
on page 58 or Making a
on page 59 for more