Motorola APX4000 XH User Manual page 112

character in it, the display shows momentary
Invalid UnitID.
4 Enter your password when you see a blinking
cursor.
5 Press the Menu Select button directly below Logn
or Ok.
If only one-factor is enabled, the display shows 1F
logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login
failed. The display returns to User Login
screen.
6 For radio enabled with two-factor login, enter your
passcode when you see a blinking cursor.
7 Press the Menu Select button directly below
Logn.
The display shows In progress.
If the login fails, the display shows momentary 2F
pscd failed. Press the Menu Select button directly
below Pscd to re-enter passcode. If successful, the
display shows User Login screen with 2F logged
108
English
in status to indicate Two-Factor Authentication
complete.
Logging out of Two-Factor Authentication
Note
Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The
next user is able to access the Inbox, Draft
and Sent messages if private data is not
deleted.
Radio which is successfully logged in to the
secured system receives advertisement from
the server that the access to the data for query
is enabled.
1 Press the Menu Select button directly below
Logt.
One of the following scenarios occurs:
• The display shows Clear private data?.
• If the Delete Messages On Session End
feature is enabled, the display shows
momentary Private data cleared.
2 Select Yes to clear all your private data or select
No to keep your private data.