Motorola APX4000 XH User Manual page 97

•
or to [ID Entry] and press the Menu
Select button directly below Edit to enter ID. A
blinking cursor appears on the screen. Use the
keypad to type or edit a user name. Press the
Menu Select button directly below Ok to
submit.
• or to scroll through the list of
predefined user names. Press the Menu
Select button directly below Sel to select the
predefined user name.
• Press and hold
list of predefined user names at a fast scroll
rate. Press the Menu Select button directly
below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary
Invalid ID.
3 Enter your Personal Identification Number (PIN)
number.
4 Press the Menu Select button directly below
Logn.
One of the following scenarios occurs:
or to scroll through the
• In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and In
progress, with Cncl.
• In ARS Non-Server Mode, the display shows
the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
• In non-ARS enabled mode, the display shows
Offline, with Logt and Exit.
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user
login failure indicator (IP indicator) icon blinks. The
display also shows momentary Login failed.
• If the PIN is invalid, login fails and the user login
failure indicator (IP indicator) icon blinks. The
display also shows momentary Login failed.
• Wait for the logged in confirmation screen. If the
login process is successful, the display shows the
successful user login indicator (IP indicator) icon
and Logged in, with Logt and Exit.
Note
To cancel the login process and return to the
initial user login screen, press the Menu
Select button directly below Cncl.
93
English