Motorola APX4000 XH User Manual page 137

If the feature fails to initiate, the radio sounds a
short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button
below Back to return to Bluetooth feature screen,
or press or the Menu Select button below
Exit to return to Home screen.
2 or to the device name and press the
Menu Select button directly below Sel to connect
to the device.
The radio starts pairing to the device.
To continue with Bluetooth pairing, see
Low Frequency-Motorola Proximity Pairing (LF-MPP)
Feature on page 130.
Turning On Bluetooth Visibility
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
The following methods are options on how to turn on
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
• Turn on Bluetooth visibility via radio menu BT:
a)
b)
Pairing with
• Turn on Bluetooth visibility via the preprogrammed
button.
a) Press the preprogrammed button to enable the
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
or to Visibility and press the Menu
Select button directly below On.
The status changes to Visible to all.
Visibility mode is enabled.
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to
turn on Bluetooth visibility.
Bluetooth visibility feature.
You hear a short, medium-pitched tone. The
display shows momentary Visible to all.
Visibility mode is enabled.
When the timer expires, the display shows
momentary Visibility failed. Repeat the
procedure to turn on Bluetooth visibility.
133
English