Saving A Zone And A Channel To A Button; Receiving And Responding To A Radio Call; Receiving And Responding To A Talkgroup Call - Motorola APX4000 XH User Manual

Short press of the programmed softkey
changes your current transmission to the zone
and channel programmed in this softkey.

Saving a Zone and a Channel to a Button

You can save the frequent used zone and channel to
the programmable buttons and keypad digit 0 to 9
buttons.
1 Toggle your zone and channel to the required
zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the
zone and channel is saved.
Note
Repeat this procedure to change the zone and
channel of the programmed button.
Short press of the programmed button
changes your current transmission to the zone
and channel programmed in this button.
56
English

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or
zone, you can proceed to receive and respond to
calls.
The LED lights up solid red while the radio is
transmitting. In conventional mode, the LED lights up
solid yellow when the radio is receiving a
transmission. In trunking mode, there is no LED
indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the
LED blinks yellow.

Receiving and Responding to a Talkgroup Call

To receive a call from a group of users, your radio
must be configured as part of that talkgroup.
When you receive a talkgroup call (while on the
Home screen) the radio triggers for your attention with
one of the following scenarios depending on the
system your radio is configured:
• For ASTRO Conventional system, the LED lights
up solid yellow. The display shows the talkgroup
alias or ID, and the caller alias or ID.