Manufacturer's Warranty - Tools; Fcc Statement (Applicable In Us) / Ic Statement (Applicable In Canada); Ec Declaration Of Conformity (Original) - Hilti PR 3 Operating Instructions Manual

For EC countries only
Do not dispose of electronic measuring tools or appliances together with household waste.
In observance of the European Directive on waste electrical and electronic equipment and its implement-
ation in accordance with national law, electrical appliances and batteries that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations. Please help us to protect the environ-
ment.

10 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

11 FCC statement (applicable in US) / IC statement (applicable in Canada)

CAUTION
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and may radiate radio frequency energy.
Accordingly, if not installed and used in accordance with
the instructions, it may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-

12 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2004/108/EC, 2006/42/EC, 2011/65/EU, 2006/66/EC,
EN ISO 12100.
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by taking the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
ceiver.
Consult your dealer or an experienced TV/radio techni-
cian for assistance.
NOTE
Changes or modifications not expressly approved by Hilti
could limit the user's right to operate the equipment.
Hilti Corporation, Feldkircherstrasse 100,
Rotating laser
FL‑9494 Schaan
PR 3
01
2011
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
09/2014
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Edward Przybylowicz
Head of BU Measuring Systems
BU Measuring Systems
09/2014
23
en