Manufacturer's Warranty - Tools; Fcc Statement (Applicable In Us) / Ic Statement (Applicable In Canada); Ec Declaration Of Conformity (Original) - Hilti PRA 300 Operating Instructions Manual

9 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

10 FCC statement (applicable in US) / IC statement (applicable in Canada)

en
CAUTION
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radiofrequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the distance between the equipment and re-
ceiver.

11 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
until 19th April 2016: 2004/108/EC, from 20th April 2016:
2014/30/EU, 2011/65/EU, 1999/5/EC, EN 300 440‑2
V1.4.1, EN 301 489‑1 V1.9.2, EN 301 489‑17 V2.2.1,
EN ISO 12100.
20
Connect the equipment to a power outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced TV/radio technician
for assistance.
NOTE
Changes or modifications not expressly approved by
Hilti may restrict the user's authorization to operate the
equipment.
This device complies with part 15 of the FCC Rules and
RSS-210 of the IC.
Operation is subject to the following two conditions:
This device shall cause no cause harmful interference.
This device must accept any interference received, in-
cluding interference that may cause undesired operation.
Hilti Corporation, Feldkircherstrasse 100,
Laser receiver
FL‑9494 Schaan
PRA 300
01
2015
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
05/2015
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Edward Przybylowicz
Head of BU Measuring Systems
BU Measuring Systems
05/2015