6078.book Page 3 Thursday, August 9, 2012 11:54 AM
This is a class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
a u t i o n
PLACING AND REMOVING THE
PORTABLE TERMINAL TO AND FROM
PLACING THE PORTABLE TERMINAL IN THE
1. Place the TETRA Handportable Terminal in the cradle/
holder by aligning the slots on the lower side of the
TETRA Handportable Terminal with the alignment guides
located at the bottom of the cradle/holder as shown in
Figure 1 below.
2. Push the TETRA Handportable Terminal downward
toward the bottom of the cradle/holder and tilt backwards
until it locks onto the swivel hook.
Figure 1. PMLN6182 Charging Cradle with Vehicular Power