Pmln7018 Passive Vehicular Radio Holder Kit Operation - Motorola PMLN7018 User Manual

6078.book Page 4 Thursday, August 9, 2012 11:54 AM
REMOVING THE TETRA
HANDPORTABLE TERMINAL FROM THE
CRADLE/HOLDER
1. Push the swivel hook clockwise to release. (See Figure 1
on page 3).
2. Lift the TETRA Handportable Terminal upwards from the
cradle/holder.
PMLN7018 PASSIVE VEHICULAR RADIO
HOLDER KIT OPERATION
This kit is designed to provide a mounting solution to the
appropriate TETRA MTP3000 Series Handportable Terminal.
This holder secures only the radio and does not provide any
charging function.
PMLN6181 & PMLN6182 VEHICULAR
CHARGING CRADLE KIT OPERATION
CHARGING THE TETRA MTP3000 SERIES
HANDPORTABLE TERMINAL BATTERY.
The PMLN6181 Vehicular Charging Cradle Kit is designed to
operate with the appropriate TETRA MTP3000 Series
Handportable Terminal with Motorola-approved battery packs
& Motorola approved Vehicular Power Adaptor (NNTN8040).
The PMLN6182 Vehicular Charging Cradle Kit is designed to
operate with the appropriate TETRA MTP3000 Series
Handportable Terminal with Motorola-approved battery
packs.
When the TETRA MTP3000 Series Handportable Terminal is
placed in the cradle, battery charging automatically takes
place if the ignition is turned ON. In case of a completely flat
battery, the Vehicular Charger Kit provides charging operation
to the TETRA MTP3000 Series Handportable Terminal within
a minute of being placed in the cradle.
4