Download  Print this page

European Union Directive Of Conformance Statement - Motorola PMLN7018 User Manual

Hide thumbs

Advertisement

Table of Contents
6078.book Page 1 Thursday, August 9, 2012 11:54 AM
INTRODUCTION
The Vehicular Charger/Holder Kit provides additional
operating convenience when using the TETRA Handportable
Terminal in an automotive environment. This User Guide
provides instructions for using the Vehicular Charger/Holder
Kit.
The PMLN6181 (Coupled with NNTN8040) & PMLN6182
Vehicular Charger Kit charges the TETRA MTP3000 Series
Handportable Terminal battery whenever the TETRA
MTP3000 Series Handportable Terminal is mounted in the
cradle and the vehicle ignition is ON.
The PMLN7018 Vehicular Radio Holder Kit provides a radio
mounting solution. The radio holder secures the radio inside
the moving vehicle while allowing easy removal when
required. The PMLN7018 Vehicular Radio Holder Kit does not
provide charging.
Attention
Read all safety instructions found in the User Guide supplied
with your TETRA Handportable Terminal prior to using your
TETRA Handportable Terminal or the Vehicular Charger/
Holder Kit.
EUROPEAN UNION DIRECTIVE OF
CONFORMANCE STATEMENT
The PMLN6181 & PMLN6182 Vehicular Charging Cradle is in
conformance with the requirements of the applicable Council
Directive 04/104/EC and 99/5/EC.
The PMLN6182 Vehicular Charging Kit is suitable for motor
vehicles with a 12 volts battery powered electrical system with
negative earth. The equipment must be installed according to
the recommendations of the Installation Manual and the
vehicle manufacturer.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmln6181Pmln6182