Sun Microsystems Sun Fire X4640 Getting Started Manual

Sun Fire ™
Getting Started Guide
This guide describes the minimum steps you must perform to power on and boot your server for the first time.
Detailed installation information can be found in the Sun Fire X4640 Server Installation Guide (821-0240). Service
and diagnostics information can be found in the Sun Fire X4640 Server Service Manual (821-0243) and Sun Fire
X4640 Server Diagnostics Guide (820-0472). These documents are available at the following web site:
http://docs.sun.com/app/docs/prod/sf.x4640#hic
To purchase a printed book, go to
Microsystems store. Refer to the section
a complete list of documentation for this system.
Contents

Safety and Compliance Information

Before performing an installation, refer to the following documents for safety information regarding the Sun Fire
X4640 Server:
Important Safety Information for Sun Hardware Systems—Printed document included in the ship kit.
■
Sun Fire X4640 Safety and Compliance Guide (821-0242)—Available online at the Sun documentation web site.
■
X4640 Server
http://store.vervante.com
"Documentation for This Product"
and follow the links to the Sun
at the end of this document for
Figure Legend
1 Server
2 Documentation set, licensing agreement,
safety information, and other documents
3 Network cables
4 Four power cables (part of country kit; part number
varies depending on country.)
5 9-pin serial to 8-pin RJ-45 adapter
1