Information About The Extension Cards; Csif4 Card (Kx-Tda0143) And Csif8 Card (Kx-Tda0144) - Panasonic KX-TDA100 Installation Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.5 Information about the Extension Cards

2.5
Information about the Extension Cards
2.5.1

CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)

Function
CSIF4: 4-port CS interface card for 4 CSs.
CSIF8: 8-port CS interface card for 8 CSs.
LED
RJ45
(LINE 1 to LINE 8)
To CS
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
CAUTION
Make sure that the status of all the CSs connected to the CSIF cards are set to in-service (INS). For
information about how to view CS information using the KX-TDA Maintenance Console, refer to "2.5.14
Utility—CS Information" in the PC Programming Manual. If there is a CS in out-of-service (OUS) status,
make sure that it is securely connected to the CSIF card. If the CS remains in OUS status, there may
be a fault with the connection. Do not leave the connected CS in OUS status since it may cause severe
damage to the CSIF card.
Notes
LINE 5 to LINE 8 are for CSIF8 card only.
When using the CSIF4 card, please note that the Hybrid IP-PBX software will recognise the CSIF4
card as the CSIF8 card. As a result, 8 cell stations may appear to be available; however, only 4 cell
stations are supported by the CSIF4 card.
For details about connecting the CS, refer to "2.8.7 Connecting a Cell Station to the Hybrid IP-PBX"
in "2.8 Connection of DECT Portable Stations" or "2.9.7 Connecting a Cell Station to the Hybrid IP-
PBX" in "2.9 Connection of 2.4 GHz Portable Stations".
110
Installation Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200

Table of Contents