Panasonic KX-TDA100 Installation Manual page 159

3.
After setting the DIP switch, connect an AC adaptor or battery box to the CS using a power supply
adaptor.
Notes
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
• For users in the United Kingdom:
240 V AC must not be used on a building site. Instead of an AC adaptor, connect a battery box to
the CS.
Telephone Cord
Modular
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
4.
Install the CS temporarily for the site survey. Install the CS at least 2 m above the floor, keeping the
antennas in the upright position.
Power Supply Adaptor
(PSZZ1TDA0142)
2.8 Connection of DECT Portable Stations
Installation Manual 159