Adam Equipment CBC SERIES Manual page 5

Manually accumulated totals
1) The values (weight and count) shown on the display can be added to the values in the
accumulator by pressing the [M+] key. The total weight, total count and number of times will
show in the "Weight", "Count", "Unit weight" display separately. The values will be displayed
for 2 seconds before returning to normal.
2) More products can then be added and the [M+] key to be pressed again. This can continue for
up to 99 entries or until the capacity of the "Weight" display is exceeded.
3) To observe the total stored value, press the [MR] key. The total will be displayed for 2 seconds.
To clear the memory- first press [MR] to recall the totals from memory and then press the [CE]
key to clear all values from the memory.
Automatic accumulated totals
The scale can be set to automatically accumulate totals when a weight is placed on the scale. However the
[M+] key is still active and can be pressed to store the values immediately. In this case the values will not be
stored when the scale returns to zero. To enable this function please see the complete manual for details
NOTE: The scale must return to zero or a negative number, before another sample can be added to the
memory.
© Adam Equipment Company 2013
5