Setting Up Your Printing Preferences On A Macintosh; Navigate To Printing Preferences; Setting Media Type, Ribbon Type, And Number Of Copies - Rimage everest User Manual

Rimage Everest Printer
Setting up your printing preferences on a
Macintosh
Printing preferences allow you to set up you Everest printer to produce the best possible labels
on your discs.

Navigate to printing preferences

1. Open the label file in the application of your choice.
2. From the File menu, select Print. The Everest properties dialog displays.

Setting media type, ribbon type, and number of copies

1. Navigate to printing preferences.
2. View or change the printing
preferences.
a. From the Media Type drop-
down menu, select the
appropriate media type.
b. Enter the desired number of
copies.
c. From the Ribbon dropdown
list, select the appropriate
ribbon type.
If you select CMY
+ White
, or
Transparent Manual:Step
•
The Auto:Complete White Undercoat selection applies a white background everywhere on
the printable area of the disc.
•
The Auto:Make Pure White Transparent selection makes pure white areas of an image
transparent.
•
Manual:Step1 and Manual:Step2 allows you to manually determine where a white
background is applied.
3. When you have made the desired choices, select Print.
Or
To close the Everest properties dialog without saving your changes, select Cancel.
14
, select
Auto:Complete White Undercoat
from the Mode dropdown list:
,
Auto:Make Pure White
110632_H