Eiki EIP-3500 Service Manual page 21

9. Fixing the grounding plate
9-1. Install the four nuts.
9-2. Fit the reinforcement (bracket A) in position.
9-3. Place the grounding plate as specified.
9-4. Fit the reinforcement (bracket B) in position.
9-5. Tighten up the four M3 screws.
9-6. Tighten up the four M4 screws.
9-7. Melt the six pins of the grounding plate.
9-4
9-3 Grounding plate
M4 screws (4 locations)
9-6
Reinforcement
(bracket B)
9-7
21
EIP-3500
9-5
M3 screws (4 locations)
9-2
Reinforcement
(bracket A)
9-1
Nuts (4 locations)
Melt the six pins.
Precaution:
* Melt the pins with a soldering
iron to fix the grounding plate.
Finally check for looseness.