Removing Of Major Parts - Eiki EIP-3500 Service Manual

Hide thumbs Also See for EIP-3500:

Table of Contents

* Before removing the projection lens, set the IRIS setting to "High Contrast". (See page 25.)

1. Removing the lamp door and the lamp unit

1-1. Loosen the lamp door fixing screw, slide the lamp door in allow direction and lift off the lamp door.

1-2. Loosen 2 lamp unit fixing screws and lift off the lamp unit.

2. Removing the top body

2-1. Insert a postcard or such thick paper under the lens barrel and between the body.

2-2. Remove 6 fixing screws for the top and bottom bodies.

2-3. Remove the fixing screw for the top body (terminal side).

2-4. Press and hold the areas (marked with ＊) and disengage the claws on the top body to remove the top body.

2-5. Draw out the postcard.

2-1

Short neighborhood

(10 cm)

Long neighborhood

(15 cm)

Thick paper such as postcard

REMOVING OF MAJOR PARTS

Lamp Unit

1-1

To protect the lens barrel

against scratches

1-2

Lamp Door

Top Body

2-4

Bottom Body

EIP-3500

2-3

2-2

2-5

Table of Contents