Table of Contents
Advertisement
EIP-3500
3. Attaching the top body (For the screws to apply, refer back to "2. Removing
the top body".)
3-1. Insert the postcard over the lens barrel.
3-2. Place the top body in position. Make sure the four hooks are tightly caught.
3-3. Draw out the postcard.
Top Body
3-2
Bottom Body
3-1
Thick paper such as postcard
4. Removing the main PWB unit and the peripheral units
4-1. Remove 2 main PWB fixing screws (terminal side).
4-2. Remove 8 main PWB fixing screws.
4-3. Remove 14 connectors from the main PWB.
4-4. Pull out the switch bracket connector and remove 3 fixing screws.
4-5. Remove the fixing screw for the front R/C PWB.
4-6. Remove 2 fixing screws for the A/F holder unit.
4-7. Lift off the main PWB in an oblique direction from the optical mechanism unit side.
4-8. Remove the speaker holder ass'y.
4-9. Remove 2 fixing screws and remove the ballast output socket.
Switch Bracket Unit
Front R/C PWB
A/F Holder unit
Main PWB Unit
4-3
[RA]
[FC]
[FA]
[FB]
[TO]
4-4
[TF]
[DD]
4-9
[SC5001]
[CW] [FD]
[AZ]
[AI] [SO]
4-5
4-6
18
Earth Lead Wire
4-2
[EA]
4-7
4-1
4-8
Speaker
Holder
Ass'y
3-3
Advertisement
Table of Contents
