Using Saved Number Redial; Saving A Number - Nortel M7410 Installation And Maintenance Manual

Displays
01:9___
CANCL BKSP
Enter digits
QUIT
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT
Select a line
Unknown number
For other displays, see

Using Saved Number Redial

ƒfl‡
You can save the number of the external call you are on (provided you dialed the
call) so that you can call it again later. Each telephone can save one number at a time
with Saved Number Redial, not one number for each line.

Saving a number

Press
ƒfl‡
Saved Number Redial records a maximum of 24 digits.
P0908510 Issue 02
Continue entering the number you want to program.
You can change the number by pressing
OK
. When you are finished, press
√
or OK .
˙
Enter the telephone number you want to program
exactly as if you were dialing it normally. When you are
OK
finished, press
˙
You have entered a code outside the code range
(01-70 for system, 71-94 for personal).
There is no number stored on the speed dial code you
have dialed.
If you want to program a line or line pool selection for
this speed dial number, select the line or line pool.
Otherwise, enter the telephone number exactly as if
you were dialing it normally. When you are finished,
press .
˙
If you want to program a line or line pool selection for
this speed dial number, select the line or line pool.
OK
Otherwise, enter the telephone number you want to
program exactly as if you were dialing it normally.
When you are finished, press
There is no line associated with the speed dial number
you are trying to use. Select a free external line or line
pool and enter the speed dial feature code again.
The system cannot dial the number stored. Reprogram
the number.
Common feature displays
Tip
You can copy a number onto an autodial button using Saved Number Redial.
while you are on the call.
Enterprise Edge Feature Programming Telephone Guide
Time savers for making calls 41
BKSP or
or OK .
OK .
on page 125.