Using Enterprise Edge Features - Nortel M7410 Installation And Maintenance Manual

118 Companion Features
Problems with lost connections are rare, but if you notice an increase of such
incidents after making large changes in the layout of your office, your Base Stations
may need to be moved or reprogrammed to accommodate the new arrangement. In
this case, contact your installer to change the Base Station configuration. (In the
U.S. you need to obtain UTAM Inc. approval before making changes to the Base
Station configuration.) Refer to Enterprise Edge Programming Operations Guide
for more information.

Using Enterprise Edge features

It is possible to use many of the same Enterprise Edge features available to an
Enterprise Edge telephone on your portable telephone. The table below lists which
features are available for use on your portable telephone. For additional information
on features and the special key sequences required to use them, refer to the feature
card that is supplied with your portable telephone.
Features supported by Enterprise Edge portable telephones
Feature
Call Forward
Call Information
Call Park
Call Park Retrieval
Cancel Call
Forward
Conference
Directed Call
Pickup
Group Pickup
Host system
signaling
Line Pool
Mute
Page
Pause
Prime line
Enterprise Edge Feature Programming Telephone Guide
Tip
If you try to send a message from a desk telephone to a portable telephone, the
display of the desk telephone shows Can't send msg.
Description
Send calls to another telephone in your Enterprise Edge system. The
display does not indicate that calls are being forwarded.
Hunt Group calls override all Call Forward features. A Hunt Group DN
can be a Call Forward destination.
Display the name or extension of an internal caller. In addition, if your
system is equipped to receive CLASS information (Caller ID), the
external caller is displayed.
On your portable, park a call.
On your portable, retrieve a parked call.
Cancel the Call Forward feature, where calls are automatically sent to
another telephone in your Enterprise Edge system.
See your Portable Telephone Feature Card .
Answer any telephone that is ringing in your Enterprise Edge system.
Answer a call ringing on another set in the same pickup group.
Link and pause are available. See "Using System features" on page 95
for more information.
On your portable, use line pools the same way a desk telephone does.
Prevent the person you are on the portable telephone with from
hearing you. Also, you can mute a portable's ringing for an incoming
call.
On your portable, page an individual telephone, several telephones,
external speakers, or the entire system.
A Hunt Group DN cannot be in a page zone.
Program in an external autodial sequence to insert a 1.5 second delay.
On your portable, may be either an Intercom Line, an Assigned Line or
a Line Pool.
P0908510 Issue 02