Using Page With External Paging Equipment; Sending Messages; Sending A Message - Nortel M7410 Installation And Maintenance Manual

Using Page with external paging equipment

When you make a page that uses external paging equipment (external page or
combined page), the Long Tones feature is automatically activated for the external
paging system only. This allows you to control optional equipment with the Long
Tones feature.

Sending messages

The Messages feature allows you to leave a message on the display of another
Enterprise Edge telephone or to analog telephones connected to an Enterprise Edge
Analog Station Module (ASM). The Messages feature indicates if you have any
messages waiting.
The Messages feature uses a message waiting list to keep a record of your internal
messages and your (external) voice mail messages (if you subscribe to Enterprise
Edge Voice Messaging service with visual message waiting indication).

Sending a message

ƒ⁄
You can leave a message on the display of another telephone in your Enterprise
Edge system.
You can send up to four messages to different telephones, including your message
center. If your telephone is a direct-dial telephone or an Enterprise Edge CAP, you
can send up to 30 messages.
Only the designated direct-dial telephone for an analog telephone connected to an
Enterprise Edge ASM can send messages to analog telephones by pressing
. Depending on the programming setup, the analog telephone provides
ƒ⁄
either a Stuttered Dial Tone or a Message Waiting Lamp to inform the user of
messages pending.
If your reply to a message is forwarded or is answered at another telephone using
the Call Pickup feature, the message remains on your telephone until you cancel it
or successfully contact the telephone that sent the message.
For analog telephones connected to an Enterprise Edge ASM, the message waiting
indicator remains on until the user invokes
telephone has the Message Reply Enhancement feature set to Yes, the message
waiting indicator is turned off automatically after the reply call is answered no
matter from where the call is answered.
P0908510 Issue 02
Tip
You can make an announcement to one person by placing a voice call to their
telephone.
Enterprise Edge Feature Programming Telephone Guide
Communicating in the office 61
. If the analog
˚£flfi