Function Menu Items - Nortel 2210 User Manual

Table 2
The seven states of the 2210 Wireless Handset (Part 2 of 2)
State Description
Active call The handset enters the active call state when a user is in an active
conversation. To enter this state, the user either makes a call or
answers an incoming call.
Push-to-talk The Push-to-talk state begins with the first Push-to-talk
transmission and ends when there has been no two-way radio
traffic on the channel for 10 seconds. While in the Push-to-talk
state, it is not possible to use the key pad for any other functions.
However, it is possible to place and receive telephone calls.

Function menu items

Your 2210 Wireless Handset has five non-programmable Function menu items.
Table 3 lists these menu items and their corresponding functions and descriptions. To
activate the functions on your 2210 Wireless Handset, press the
active (idle) or active (off-hook) states – and the appropriate number on the key pad,
or use the Up and Down
functions and the Select
Table 3
2210 Wireless Handset function menu items (Part 1 of 2)
Function
Function
menu item
1 Mute
2 Hold
buttons on the side of the handset to scroll through the
button to select and activate a function.
Description
Use the Mute function to listen to the receiving
party without transmitting. Press the Mute key
again to return to a two-way conversation.
Use the Hold function to put an active call on hold.
Press the Line key beside the flashing icon to
return to the caller on hold.
Your WLAN Handset 2210
Function key – in the
21