Function Menu Items - Nortel 2210 User Manual

Your WLAN Handset 2210
Table 2
The WLAN Handset 2210 states (Part 2 of 2)
State Description
Active This state is entered when the handset is in standby state and the
(on-hook) user presses the
from the Call Server point of view, and loud ringing will occur
(when required). The handset display is active and the Menu,
FCN
standby state by pressing the
are pressed for a period of 10 seconds, the state times out and the
handset returns to the standby state. Pressing the
Call
Power Off/End Call
state.
Note: If the user selects any menu item or presses a soft key, the handset changes
into the active (off-hook) state, the timeout condition is removed and handset will
use a soft ring.
Error The handset enters the error state when it loses the signal from the
access point. If the handset regains the signal within
approximately 20 seconds, it returns to the state it just left. If the
handset is out of range for longer than 20 seconds, the handset
restarts and returns to the standby state.
Active call The handset enters the active call state when a user is in an active
conversation. To enter this state, the user either makes a call or
answers an incoming call. While in this state, the handset will use
a soft ring to alert the user to another call. The user leaves this
state when the call is completed by pressing the
Power Off/End Call
the user answers it.

Function menu items

Your WLAN Handset 2210 has six non-programmable Function menu items. Table 3
lists these menu items and their corresponding functions and descriptions. To activate
the functions on your WLAN Handset 2210, press the
(on-hook) or active (off-hook) states – and the appropriate number on the keypad, or
use the Up and Down
functions and the Select
22
Menu
or Line menus can be accessed. The user returns to the
key in any of the menus will exit the menu. Pressing the
key again will return the handset to Standby
key or if an incoming call is ended before
buttons on the side of the handset to scroll through the
button to select and activate a function.
key. The handset appears to be on-hook
Power Off/End Call
Function
key. If no keys
Power Off/End
key – in the active