Function Menu Items - Nortel 2212 User Manual

Your WLAN Handset 2212
Table 2
The WLAN Handset 2212 states (Sheet 3 of 3)
State Description
Active call The handset enters the active call state when a user is in an active
conversation. To enter this state, the user either makes a call or
answers an incoming call. While in this state, the handset will use
a soft ring to alert the user to another call. The user leaves this
state when the call is completed by pressing the
Power Off/End Call
before the user answers it.

Function menu items

Your WLAN Handset 2212 has six non-programmable Function menu items. Table 3
lists these menu items and their corresponding functions and descriptions. To activate
the functions on your WLAN Handset 2212, press the
(on-hook) or active (off-hook) states – and the appropriate number on the keypad, or
use the Up and Down
functions and the Select
Note: Pressing the Function key when the handset is in active (idle) state gives a dif-
ferent menu. See "User Option menu" on page 41 for details.
Table 3
WLAN Handset 2212 function menu items (Sheet 1 of 2)
Function
Function
menu item
1 Mute
2 Hold
22
key or when an incoming call is ended
buttons on the side of the handset to scroll through the
button to select and activate a function.
Description
Use the Mute function to listen to the receiving
party without transmitting. Press the
again to return to a two-way conversation.
Use the Hold function to put an active call on hold.
Press the
return to the caller on hold.
Function
Line key beside the flashing icon to
key – in the active
Mute key